Narasimha Killing Hiranyakashipu

$835
Item Code: ZBG06
Specifications:
Panchaloha Bronze Statue from Swamimalai
Height: 6.8 inch
Width: 5.54 inch
Depth: 3.4 inch
Weight: 1.50 kg
Handmade
Handmade
Free delivery
Free delivery
Fully insured
Fully insured
Shipped to 153 countries
Shipped to 153 countries
More than 1M+ customers worldwide
More than 1M+ customers worldwide

This magnificent bronze cast,a tiny statue seven inches in height, five and half inches image proper, and three point four inches podium – a rectangular base, represents Narasimha, the 4th of the ten incarnations of Lord Vishnu. Narasimha was Lord Vishnu’s half man and half animal incarnation he had taken to for killing demon Hiranyakashipu, the father of Prahlad, a great believer of Vishnu. The sons of Diti by sage Kashyapa Hiranyaksha and Hiranyakashipu were two notorious brothers, the progenitors of the clan of demons. They had pleased Brahma with rigorous penance by which Hiranyaksha was granted that he could not be killed by either a god or a human being, and Hiranyakashipu, that he shall not be killed neither by a god, animal nor a human being, nor during the day nor during the night, nor inside the house nor outside it, nor on the earth nor in the sky and by none of the weapons.

With their exceptional powers both, Hiranyaksha and Hiranyakashipu, grew greatly arrogant. As a result Hiranyaksha one day dragged the earth into ‘patala’ – nether world, and also Brahma’s Vedas, that is, the life that the earth symbolised, and the light that the Vedas stood for. Then Vishnu incarnated as boar and killed Hiranyaksha with its tusks and restored to Brahma his Vedas, and placed the earth in its place. For killing his brother Hiranyaksha Hiranyakashipu was extremely annoyed with Vishnu. He not only banned his worship within his territories but even uttering his name was declared punishable. However, his own son Prahlad turned into a Vishnu’s believer and despite repeated warnings he did not give up commemorating Lord Vishnu’s name. He made several attempts even to kill him but every time the result was contrary. Prahlad used to claim that Lord Vishnu was omnipresent.

One evening during twilight, when it was neither the day nor the night, Hiranyakashipu challenged Prahlad if his Vishnu was present also in the wood-frame of his door. However, before Prahlad replied, the door-frame burst and from it emerged a fiercely roaring divine figure with fiery eyes, projecting teeth, a lion’s face and jaws, terrifying open mouth, and the man’s body. Neither the man nor the animal but a being combining both the divine form – Narasimha – half man, half lion, caught hold of Hiranyakashipu, dragged him to the centre of the door, lifted him on its left thigh, and tearing with its nails the demon’s bowels killed him. The divine figure was neither the man nor the animal; the twilight hour, neither the day nor the night; in the centre of the door it was neither inside the house nor outside it, lifted on its thigh he was killed neither on the earth, nor in the sky, and torn with nails no weapon was used in killing him.

The image of Narasimha has been installed on a two-tiered podium, base unit, an inverted lotus form, and the upper one, a lotus opening upwards and holding over it a plain moulding. The podium is a perfect square and is largely simplified but perfectly matched to the overall model of the image. In most other representations – a stone sculpture, wood-carving, metal cast, or canvas painting, Narasimha is represented as seated over a raised platform in ‘lalitasana’ holding Hiranyakashipu on his left thigh and tearing his bowels. Requiring far greater skill, the artist has cast in this statue the image of Narasimha as dancing. Balancing the entire figure on one leg, and that too, with its heal slightly lifted, the Narasimha’s dance is exactly similar to Lord Vishnu’s Vishnukranta that he performed later in his fifth incarnation as Vaman known as Trivikrama for subduing arrogant Bali or Mahabali, the great grandson of Hiranyakashipu.

In VishnukrantVaman shoots his left leg a missile-like forcefully to right exactly parallel to the earth, while the right is bent at 120 degree angle. However, while with his missile-like shot leg Trivikrama pushes Bali into ‘patala’ – nether world, Narasimha uses it for holding on it the figure of Hiranyakashipu. With a different aesthetic taste the artist of this piece does not conceive the image of Hiranyakashipu as ferocious as described in texts. He has well-trimmed moustaches and a benign face and his figure manifests the beauty of rhythm. The podium also houses a winged celestial being who with his jubilant gestures hails the act and accords to it divine sanction. A tougher alloy like bronze the artist has manipulated it to yield a gold ornament’s details – precision, overall sophistication and made it to breathe a kind of classicism, divine aura, and beauty par excellence.

This description by Prof. P.C. Jain and Dr. Daljeet. Prof. Jain specializes on the aesthetics of literature and is the author of numerous books on Indian art and culture. Dr. Daljeet is the curator of the Miniature Painting Gallery, National Museum, New Delhi. They have both collaborated together on a number of books.

Eternal Brilliance Unveiled: The Mystique of Panchaloha Bronze and Artful Maintenance Rituals

 

Bronze is a metal alloy that has the primary composition of Copper and Tin. There is also an addition of other metals such as Manganese, Aluminium, Nickel, and some non-metals such as Phosphorus. This composition of several metals and non-metals makes Bronze an extremely durable and strong metal alloy. It is for this reason that Bronze is extensively used for casting sculptures and statues. Since Bronze has a low melting point, it usually tends to fill in the finest details of a mould and when it cools down, it shrinks a little that makes it easier to separate from the mould.

" If you happen to have a bronze statue, simply use a cotton cloth with some coconut oil or any other natural oil to clean the statue. "

 

A village named Swamimalai in South India is especially known for exceptionally well-crafted Bronze icons of Hindu Gods and Goddesses. The skilled artisans of this place use Panchaloha Bronze for casting the icons. Panchaloha Bronze is made of five metals; Copper, Zinc, Lead, and small quantities of Gold and Silver. Zinc gives a golden hue to the finished figure and Lead makes the alloy softer for the easy application of a chisel and hammer. The common technique for producing these statues and sculptures is the “Lost-wax” method. Because of the high durability of bronze sculptures and statues, less maintenance is required, and can still last up to many decades.

Exotic India takes great pride in its collection of hand-picked Panchaloha Statues. You will find the murtis of Gods (Krishna, Hanuman, Narasimha, Ganesha, Nataraja, and Kartikeya) and Goddesses (Saraswati, Lakshmi, Durga, and Parvati), and Buddha statues. You can also buy Ritual paraphernalia (Wicks lamp, Puja Kalash, Cymbals, and Puja Flag) on the website. All these statues and items have been made with a lot of care and attention, giving them a flawless finish. Their fine carving detail represents the rich tradition of India.


Sculpting Dreams in Metal: The Enigmatic Alchemy of Panchaloha Bronze Masterpieces

Bronze statues and sculptures are known for their exquisite beauty and the divinity that they emit all around the space. Bronze is considered an excellent metal alloy, composed primarily of copper and tin. Many properties make it suitable for sculpting even the most intricate and complex structures. There was a period in history, known as the “Bronze Age'', in which most sculptors preferred to work with Bronze as it was considered the hardest metal. Bronze is especially appreciated for its durability, ductility, and corrosion-resistance properties. India is especially known for its elegant workmanship of skills working with Bronze. The artisans of a town named Swamimalai in South India have been following a tradition of bronze murti making for ages. They use a special material known as Panchaloha bronze to make fascinating icons of Hindu Gods and Goddesses. All of us are allured by the beauty of bronze statues and sculptures but there goes a tough hand in casting those masterpieces with little or no imperfections. Since it is an extremely elaborate process, a sculptor needs to be highly skilled in making bronze antiques. The most common technique for casting bronze sculptures that has been followed since ancient times is the “Lost-wax” process which involves many steps:

1. Clay model making

The making of a bronze statue or sculpture starts with preparing a full-sized clay (usually Plasticine) model of the sculpture. This allows the artist to have an idea about the overall shape and form of the desired sculpture before working with bronze, a much more expensive and difficult-to-work-with material.
Image

2. Mould making

Once the clay model is ready, a mould of the original sculpture is made. This is done by carefully covering the clay model with plaster strips. This step is carried out in such a way that no air bubbles are formed. It takes up to 24 hours for the plaster to dry. Once dried, the plaster is then gently removed from the clay model. The removal happens easily because the inner mould is usually made of materials such as polyurethane rubber or silicone.
Image

3. Wax filling and removal

In this step, molten bronze or wax is poured or filled into the mould in such a way that it gets even into the finest details. The mould is then turned upside down and left to cool and harden. When the wax has hardened, it is removed from the mould.
Image

4. Chasing

Chasing is the process in which the artist refines the surface of the bronze statue using various tools to achieve fine details. This smoothens the surface and gives the statue a finished look. If some parts of the statue were moulded separately, they are now heated and attached.
Image

5. Applying a patina

Bronze sculptures are known for their unique look or sheen on the surface. This may take several years to achieve naturally. Applying patina to bronze sculptures is an important step to make them appear attractive. Working with clay, plaster mould, and molten wax can be messy and therefore sculptors wear old clothes and remain careful. The entire process of making a bronze statue takes several months to complete. Bronze sculptures last for many centuries because of the high durability of the material. Many centuries down the line, these sculptures continue to be appreciated for their majestic beauty.
Image
Frequently Asked Questions
  • Q. Is the statue hollow or solid ?
    A. Panchaloha bronze statues are made through a process of lost wax casting, hence they are solid. To know more about how bronze statues are made, please read our article on Panchaloha Bronze Statues. Whereas, brass statues are made through a process of clay casting, hence are hollow.
  • Q. Can I see the original photo of the product ?
    A. For original pictures of the statue, kindly email us at help@exoticindia.com.
  • Q. Can I return the statue ?
    A. All returns must be postmarked within seven (7) days of the delivery date. All returned items must be in new and unused condition, with all original tags and labels attached. To know more please view our return policy.
  • Q. Can you customise the statue for me ?
    A. For any customisation, a new bronze statue has to be made. To know more, kindly email us at help@exoticindia.com.
Add a review
Have A Question

For privacy concerns, please view our Privacy Policy